Measure portfolio properties without clicking around the screen


Just upload the excel file of properties,

sit back and watch


SiteRecon is an end-to-end,

fully automated property measurement solution


SiteRecon users

Who is this for?

Contractors working in exterior property maintenance - landscaping, snow removal, lawn care and tree care

Contractors adopting business management software

  • Migrating to a system like Aspire requires you to feed in measurements of all portfolio properties
  • Measuring hundreds of properties is a huge overhead for your team, especially in the middle of migration process
  • If you haven't measured properties yet or the measurements are old, it's best to measure them again to make the most of your software investment

Contractors looking to ensure portfolio properties are measured correctly

  • When was the last time properties were measured? Years ago?
  • Were they measured with the same level of consistency? Or some measurements were done in a rush?
  • Have you measured all the assets you work with - hard edge, soft edge, shrubs, flower beds, trees, driveway, sidewalk?

Contractors bidding on opportunities with multiple properties

  • Bidding for contracts with dozens or hundreds of properties can be a pain in the neck
  • Measurements can take days and diverts attention from sales and operations
  • Inaccurate and approximate measurements can lead to underbidding (massively eroding profitability) or overbidding (loss of opportunity)

Why SiteRecon?

Testimonials from platform users

Measurements happen faster than we can do it in-house

The biggest benefit to this platform is kind of twofold - it happened faster than we could do it in-house and the benefit is not just the savings of time of one person, but the fact that we can also redirect that person on to something else

Context - Before SiteRecon, properties were measured on Go iLawn and someone had to allocate measurement time in their calendar

Michael Mayberry, CTO, Level Green Landscaping

We don't need somebody clicking around the map now

We do not need to have somebody spend their time going through a map and clicking around a map, we can just get a good outline of the property and put the features that we want. And a few hours later, we get the results that we need.

Context - Manager Trainees were responsible for measurements before SiteRecon, now they can focus on training and learning.

Michael Mayberry, CTO, Level Green Landscaping

We need transparency and SiteRecon delivers

They've also put the data in a place that makes it accessible and visible to everyone in our company, which is important. We need transparency in our company so that we can continue with our open communication. And SiteRecon delivers that to us.

Context - Transparency is critical as multiple roles at Level Green need to collaborate during the estimating and bidding process

Michael Mayberry, CTO, Level Green Landscaping

Mike's 2 cents for green industry

And think about it from that perspective - is having somebody measure something on a screen or go out into the field and measure it with a wheel, is that really the best use of their time? Or is that just because it's how you've always done it

Michael Mayberry, CTO, Level Green Landscaping

Case Studies

Greenscape, Inc

Daniel Currin, CEO

Mainscape, Inc

Nate Hyde, VP Sales

Level Green Landsaping

Michael Mayberry, CTO

SiteRecon automates property measurements for...

Snow management

Parking lots, sidewalks and pavement surface areas for snow plowing and de-icing estimations

Lawn care

Turf, hard edges and soft edges for lawn care, irrigation and fertilization

Shrub care

Beds and pruning surface areas for shrub care

Tree care

Tree count and height for estimating tree care operations

How to automate property measurements now

Sign up

Sign up on SiteRecon platform and request credits to activate account

Buy credits

Buy credits to order measurements. You just need $10 to get started

Order measurements

Order measurements and get measurements within hours

See SiteRecon in Action

Measure properties at the click of a button

What is SiteRecon?

SiteRecon is an end-to-end, fully automated property measurement solution. It is an online platform that measures the properties for you. It has no drawing tool or editing tool on it.

It has a button - 'Get Measurements' - that creates orders to generate property measurements.

All you need to do is input the address, select the features to measure and press that button - SiteRecon pulls the property outline and high resolution aerial imagery; measures the property, checks for quality and delivers the data.

Result - fully automated property measurements.

How does SiteRecon automate property measurements?

SiteRecon delivers the following assets at the click-of-a-button in a few hours

Latest high definition aerial image

(delivered in a few seconds with the property outline)

Total measurements in an excel

A map of all the features measured

What can I measure with SiteRecon?

You can measure standard features such as surface area of turf, beds, sidewalks, parking lots; length of soft edges and hard edges; count of trees and palm trees.

  1. This is the list of 18 property features you can measure on SiteRecon - https://www.notion.so/Types-of-feature-731dc79b05404a0fa4e153efcf722d6b
  2. Higher-order features such as surface area of shrubs, slop of turf and height of trees are measured on request.

How accurate is it?

  1. Map outlines are accurate within 7 cms of their actual position on the ground. Measurement numbers are extracted using these map outlines.
  2. You can get similar accuracy from a property survey is someone moves the measuring wheel exactly along the boundary of the parking lot on the property. And then repeat the exercise of turf, beds and all other features that you measure

SiteRecon users have verified the measurements through site visits and you can see their testimonial in the case study videos.

How does SiteRecon handle a property covered by trees?

SiteRecon combines different sources of imagery to get the most complete picture of the site -

  1. Leaf-off imagery collected during winters to see through tree canopies
  2. Street imagery to get a view from ground

The above sources are combined with the latest high resolution aerial imagery of the site to extract measurements.

Can SiteRecon measure a property that was recently constructed?

Yes. SiteRecon access the best-in-class aerial imagery from Nearmap to extract measurements. Nearmap imagery is collected over 370 cities within the last 4-9 months. The collection frequency depends on how big your city is.

Can SiteRecon measure hundreds of properties in one-go?

Yes. It is possible to place bulk orders on SiteRecon. The customer support team supports you directly with such requests.

This how it works -

  1. Share an excel containing the list of addresses and the measurements needed.
  2. Support team creates the orders if the property is discovered using the address with over 90% confidence.
  3. In cases of lesser confidence, you approve the property parcel outlines and place the order
  4. Properties are mapped at a rate of few dozen per day and the support team follows up to ensure that the data is reviewed and approved.

Is there a restriction on the type of property that SiteRecon measures?

No. SiteRecon supports measurements for -

  1. Residential properties
  2. Commercial properties
  3. HOAs - common areas, private areas
  4. Municipal right-of-ways
  5. Sub-parts of larger properties
  6. Properties outside cities in continental US - in Alaska, Hawaii, Samoa, Canada, Venezuela and Antarctica.

How do I take the measurements to the field for site visits?

You can open SiteRecon app on mobile devices such as smartphones and tablets/iPads. As long as you have an internet connection and a mobile in the field, you can access the maps.

How do I share the data with my team and customers?

SiteRecon maps and measurements can be shared as easily as a YouTube video - using a web page link.

If you are a business developer and you want operations managers to visit the site and approve the data, you can use common logins for now. From January, SiteRecon will enable you to share maps with accounts created with the email ids of your organisation.

What does the onboarding process looks like?

Once you decide to subscribe, there are five steps to go through -

  1. Signing data license agreement
  2. Paying for platform subscription
  3. Signing up on the platform
  4. Completing the 1-hour training call with SiteRecon team
  5. Ordering first property to measure

Who uses the platform? What is their use case?

The most common users of the platform are -

  1. Business developers - ordering measurements while working on opportunities
  2. Estimators - offloading measurement tasks on the platform
  3. Operations managers - verifying the maps and measurements through site visits
  4. Admin and support staff - helping leadership of their companies execute bulk orders on the platform when they decide to move to a business management software like Aspire.

What does the onboarding process looks like?

Once you decide to subscribe, there are five steps to go through -

  1. Signing data license agreement
  2. Paying for platform subscription
  3. Signing up on the platform
  4. Completing the 1-hour training call with SiteRecon team
  5. Ordering first property to measure

Book a session

Ready to try SiteRecon?

Early bird users will get huge discounts

Your cart
    Checkout